|
Electrical
Operating
Voltage: 24VDC +/−10% (Power
Adaptor Module Included).
Power
Consumption: <2AMPS (Triple Track
Reading & Writing at High Coercivity).
MTBF: 160,000 Power On Hours.
Encoding/Decoding
Density: 75 or 210 BPI, for each track.
Media
Coercivity: 250 to 4200 oersted
Communication: RS-232, USB-CDC
Environmental
Operating
Temperature: 32° F to 122° F (0°
C to 50° C). Maximum 95% non-condensing
Storage
Temperature: 14° F to 140° F
(-10° C to 60° C), non-condensing.
Reliability
Read
Head Life: 1,000,000 passes minimum.*
Write
Head: 1,000,000 passes minimum.*
Low
Amplitude: Read >30%@210 BPI, >40%@75
BPI.
Write
Performance: Meets or exceeds ISO 7811
requirement for new cards.
Warranty: One year, parts and labor.
Agency: FCC Class A, CE Class A, and UL Listed.
Mechanical
Card
Formats: ISO/ANSI, AAMVA, and USER
(Custom).
Available
Configurations: Tracks 1 and 2 or Tracks
1, 2, and 3.
Swipe
Speed (Reading): 5 to 55 inches per
second.
Swipe
Speed (Writing): 5 to 35 inches per
second.
Media
Thickness: .007 to .045 inches.
Weight: 3 lb (1.36 kg).
Dimensions
(HxWxL): 2.6 inches (67 mm) x 2.5 inches
(64 mm) x 8.0 inches (204 mm) (includes feet)
Color: Beige.
Housing: Die cast zinc (ZAMAK).
Workshop
Software Application Features
Write Writes data to a card in the Card Type
format
Read Reads card data and displays the data in
Track boxes
Compare Compares multiple cards to a single
reference card
Erase Erases the selected tracks of data on a
card
Sequential
Write Writes both fixed and/or
sequential data to a card
Write
from File Writes to each card the next
record from a file
Read
to File Reads a card and enters the data
as a record into a file
Database
Write Writes cards from a database CSV
file and Setup file
Card
Type Provides card format selection
based on Setup and Standards
ISO Selects 7811 ISO Standard card format
AAMVA Selects AAMVA standard, based on ISO
Standards
USER Selects the card format from settings
in Setup USER tab
RAW Reads and writes data and displays in a
Hexadecimal format
Setup Provides selections and settings of
formats and track parameters
Leading
Zero Sets number of leading zeros
before the Start Sentinel
BPI
Setting Selects individual track data
density (75 or 210 bits/inch)
Set
Coercivity Sets the writing coercivity
to High or Low (all tracks)
-
Start Sentinel Selects the Start
Sentinel character for the individual tracks
End
Sentinel Selects the End Sentinel
character for the individual tracks
Bits/Character Selects the number of bits per
character for individual tracks
Parity Selects character parity bit logic for
individual tracks
Default Resets the parameters and settings to
the standard norms
*
All reliability numbers are based on operation in a benign
environment.
Back to Magstripe Encoder info
|